The King's Crown over Crossed Scepters was a View mark used by British Proof Houses to mark their approval on the breech end of the King's Musket, known today as the Brown Bess Musket. View and Proof Marks were also required on all civilian guns, after testing.
The King's Crown and Scepters View Mark is generally found on the top of the barrel near the breech, or on the off side near the breech.
The view mark is about .440" wide, about .450" tall, and the tool body is 2-1/2" length, 1/2" diameter, brightly polished steel, hardened to Rc 62 to 65 (as hard as a file). Wrap the body with masking tape to provide a better grip.
Made in the USA, of very hard steel, this tool will give a long life, if used correctly.
Be careful, be safe. If mis-struck, this steel marking punch can become a projectile. Wear safety glasses. Protect your fingers.
Our instructions are included with each tool. Or click the download tab to view, and print these step-by-step instructions as a .pdf file.
Marks on rounded or flat steel surfaces require multiple strikes, in sequence. Marks in wood require only one controlled strike.
No Return, No Refund, No Exchange. Steel marking punches are expendable hardened steel tool bits, with a service life similar to drill bits or hand taps. The value is in the first use. Longevity is under the control of the user. We do not offer a warranty nor a refund for these tools. They are an investment for future use.
Never attempt to mark tempered steel, plated steel, or case-hardened steel with these hand stamps.
We offer the full set of four (4) hand stamps, replicas of original marks found on Brown Bess Muskets:
The King's Crown and Scepters View Mark is generally found on the top of the barrel near the breech, or on the off side near the breech.
The view mark is about .440" wide, about .450" tall, and the tool body is 2-1/2" length, 1/2" diameter, brightly polished steel, hardened to Rc 62 to 65 (as hard as a file). Wrap the body with masking tape to provide a better grip.
Made in the USA, of very hard steel, this tool will give a long life, if used correctly.
Be careful, be safe. If mis-struck, this steel marking punch can become a projectile. Wear safety glasses. Protect your fingers.
Our instructions are included with each tool. Or click the download tab to view, and print these step-by-step instructions as a .pdf file.
Marks on rounded or flat steel surfaces require multiple strikes, in sequence. Marks in wood require only one controlled strike.
No Return, No Refund, No Exchange. Steel marking punches are expendable hardened steel tool bits, with a service life similar to drill bits or hand taps. The value is in the first use. Longevity is under the control of the user. We do not offer a warranty nor a refund for these tools. They are an investment for future use.
Never attempt to mark tempered steel, plated steel, or case-hardened steel with these hand stamps.
We offer the full set of four (4) hand stamps, replicas of original marks found on Brown Bess Muskets:
STAMP-GR-A
Hand Stamp,
Proof Mark for Brown Bess Musket,
hardened steel, made in the USA,
by Track of the Wolf, Inc.
STAMP-GR-CROWN
Hand Stamp,
Inspector's Mark for Brown Bess,
hardened steel, made in the USA,
by Track of the Wolf, Inc.
STAMP-GR-SKM
Hand Stamp,
Store Keeper's Mark for Brown Bess Musket,
hardened steel, made in the USA,
by Track of the Wolf, Inc.
Adobe Reader required to view the files below.
hand-stamp-instructions.pdf
Last updated: 8/15/2008 (955 KB)
page_108.pdf
Last updated: 4/25/2012 (136 KB)
page_207.pdf
Last updated: 4/25/2012 (181 KB)