Our complete set of screws & pins for the Kentucky pistol are made of unplated or black oxide finished steel, with slotted heads. These are becoming scarce.
Our set includes:
We recommend that you also order: DRILL-3/32" to install the steel dowel pins, TAP-8-32-T taper tap, 8-32, to install the lock and tang bolt and other drill bits as needed for tap drills and clearance drills, for the several bolts and screws.
Our set includes:
- 2 #BOLT-L-8-F lock bolt, 8-32, 3/8" head, for mounting the lock, plus
- 1 #BOLT-T-8-OS tang bolt, 8-32, countersing oval head, plus
- 3 #SCREW-6x5/8 wood screws, #6 x 5/8", for mounting the triggerguard, plus
- 3 #SCREW-8x5/8 wood screws, #8 x 5/8", for mounting the triggerguard, plus
- 6 #PIN-3/32 steel dowel pins, 3/32" diameter, for barrel lugs and rod pipes
We recommend that you also order: DRILL-3/32" to install the steel dowel pins, TAP-8-32-T taper tap, 8-32, to install the lock and tang bolt and other drill bits as needed for tap drills and clearance drills, for the several bolts and screws.
DRILL-3/32
drill bit, HSS, 3/32", .0938" diameter, drill for 3/32" pins
DRILL-16
drill bit, HSS, Number 16, .1770" diameter, clearance drill for No. 8 bolt or screw
DRILL-25
drill bit, HSS, Number 25, .1495" diameter, clearance drill No. 6 bolt or screw
DRILL-29
drill bit, HSS, Number 29, .1360" diameter, tap drill for 8-32 thread
DRILL-CS-82-6
counter sink,
82 degrees, 3/8" diameter
TAP-8-32-T
Tap, high carbon steel, 8-32 thread, taper tap
TAP-W-0
Tap handle, accepts #0 to #8 diameter taps
Adobe Reader required to view the files below.
page_114.pdf
Last updated: 4/25/2012 (102 KB)
page_192.pdf
Last updated: 4/25/2012 (195 KB)