This Ruger Old Army percussion revolver is polished stainless steel with blued steel target sights. Typical of stainless steel revolvers the finish shows only a few minor marks from firing and cleaning. The bore is bright, clean, and is ready to shoot. This stainless steel revolver has adjustable sights, and bright stainless finish. The front sight is a rounded blued steel blade, and the adjustable rear sight is blued steel, with a square notch. This combination presents a perfect modern sight picture, a square blade in a square notch. The top of the barrel is marked Strum, Ruger & Co. INC., Southport, Conn. U.S.A. with the additional warnings stamped on later production guns. The cylinder has safety notches cut between each nipple recess. Pull the hammer to half-cock, turn the cylinder to align the safety notch with the hammer nose, and set the hammer into the notch. Never carry any revolver with the hammer on a capped nipple.
The factory fitted walnut grips, with Ruger emblem, are in good condition with only a few small handling marks. This revolver has a smooth action, with nice trigger release. The cylinder is marked For Black Powder Only. The revolver is fitted with the factory original hex nipples. These can be removed with a factory hex nipple wrench (not included) or a 3/16" hex socket. We offer stainless steel replacement nipples, our #PRA-S that use a standard large revolver nipple wrench. The factory recommends a .457" round ball. If your revolver shaves lead, slightly polish each chamber mouth with fine emery and a marble, until the ball seats fully, compressing the lead instead of shearing it.
This revolver includes a brown leather holster and belt from El Paso Saddlery Co. that is sized to fit this revolver. The holster has a leather loop that slips over the hammer to help prevent loss. The 2-5/8" wide leather belt is for someone with a size 34 waist or smaller.
A good used example of this popular percussion revolver. Preferred by serious target shooters, this pistol will be a joy to shoot at the range. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.
The factory fitted walnut grips, with Ruger emblem, are in good condition with only a few small handling marks. This revolver has a smooth action, with nice trigger release. The cylinder is marked For Black Powder Only. The revolver is fitted with the factory original hex nipples. These can be removed with a factory hex nipple wrench (not included) or a 3/16" hex socket. We offer stainless steel replacement nipples, our #PRA-S that use a standard large revolver nipple wrench. The factory recommends a .457" round ball. If your revolver shaves lead, slightly polish each chamber mouth with fine emery and a marble, until the ball seats fully, compressing the lead instead of shearing it.
This revolver includes a brown leather holster and belt from El Paso Saddlery Co. that is sized to fit this revolver. The holster has a leather loop that slips over the hammer to help prevent loss. The 2-5/8" wide leather belt is for someone with a size 34 waist or smaller.
A good used example of this popular percussion revolver. Preferred by serious target shooters, this pistol will be a joy to shoot at the range. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.
Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.
Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.
Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.
BALL-457
.457" round balls, pure lead, Hornady, per 100
BORE-CLEAN
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
BORE-MOP-45-10
Bore mop, 100% Cotton, for .45 caliber, 10-32 thread, washable
BRUSH-45-10
Bore brush, bronze, for .45 caliber, 10-32 thread
FLASK-COLT
Powder Flask,
Colt pattern for Army & Navy revolvers,
accepts all spouts with 10-1mm threads
JS-45-6-10
Jag, jagged cleaning tip, brass, .45 caliber, 3/8 rod, 10-32 thread
LUBE-SPG
SPG Bullet Lubricant,
one 1-1/4 ounce stick, for Black or Smokeless Powder
MINK-OIL
Trapper's MINK OIL TALLOW,
patch grease,
for match shooting & cold weather hunting,
one 8 oz. tin
NW-130
Nipple Wrench for Revolvers,
for 1858 Remington .44 Revolver,
.31 & .36 Pocket & Police Model Colt Revolvers,
and other revolvers with a tight nipple recess
OX-CLEAN-45C
Cleaning Patches, 2" diameter, bag of 100, pure cotton flannel, for .30 to .40 caliber
OX-REV-44-SEAL
Ox-Yoke Revolver Wonder Seal, 100 seals for .44-.45 cal.
OX-WAD-44-W
.44/.45 caliber revolver Wonder Wad,
bag of 100 lubricated felt wads
PRA-S
Nipple, 12-28 thread, for Ruger Old Army revolver, #11 CCI cap, stainless steel, for Ruger hex socket or Track's #NW-130 wrench
Cone length: 0.270" Thread journal length: 0.260" Overall length: 0.530" Diameter of base: 0.285"
WORM-CORK-10
Patch puller, corkscrew worm, steel, brass base, 10-32 thread
