This replica percussion revolver is known as the Leech & Rigdon Confederate revolver. Based on the Colt 1851 Navy revolver, Leech and Rigdon manufactured an estimated 1500 revolvers for the Confederacy with the vast majority manufactured in Greensboro, Georgia. This .36 caliber revolver is assembled with a French gray steel frame, blued cylinder and 7-1/2" round barrel, brass triggerguard and backstrap, and fitted with beech grips. Used, this Confederate revolver has a few marks on the cylinder from the latch, and wedge key from disassembly. It appears to be very well maintained with a bright bore.
The .36 caliber, or "Navy caliber" barrel is turned round from the muzzle in Souther revolver fashion. A pointed brass bead front sight is mounted near the muzzle. A notch in the hammer, serves as a rear sight. The top flat at the breech is marked Leech & Rigdon C.S.A.. The left side of the barrel is marked High Standard Hamden CT USA above the wedge key. The wedge key shows a few small marks from disassembly.
Disassembly for cleaning is easy. Drive the wedge key out of the barrel, using our brass wedge key punch. Slide off the barrel, and cylinder. Wipe down the frame and grip, but avoid disassembly of the action. It is wise to completely strip and clean the action about once per year, using a well fitted screwdriver, made to fit the small screws. Remove the nipples with our #NW-140 wrench, and wash the barrel, nipples, and cylinder with a bottle brush, in hot soapy water. Dry the parts with a cloth, or rinse them in boiling water, and apply oil. Apply a touch of Birchwood Casey's Choke Tube Lubricant to the threads of the nipples, before re-installing them. This anti-seize will prevent the nipples from becoming stuck due to powder fouling.
This Leech & Rigdon Confederate revolver has a lightly used appearance with a few marks on the cylinder and the wedge key. With a bright bore, it will be a joy to shoot! Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.
The .36 caliber, or "Navy caliber" barrel is turned round from the muzzle in Souther revolver fashion. A pointed brass bead front sight is mounted near the muzzle. A notch in the hammer, serves as a rear sight. The top flat at the breech is marked Leech & Rigdon C.S.A.. The left side of the barrel is marked High Standard Hamden CT USA above the wedge key. The wedge key shows a few small marks from disassembly.
Disassembly for cleaning is easy. Drive the wedge key out of the barrel, using our brass wedge key punch. Slide off the barrel, and cylinder. Wipe down the frame and grip, but avoid disassembly of the action. It is wise to completely strip and clean the action about once per year, using a well fitted screwdriver, made to fit the small screws. Remove the nipples with our #NW-140 wrench, and wash the barrel, nipples, and cylinder with a bottle brush, in hot soapy water. Dry the parts with a cloth, or rinse them in boiling water, and apply oil. Apply a touch of Birchwood Casey's Choke Tube Lubricant to the threads of the nipples, before re-installing them. This anti-seize will prevent the nipples from becoming stuck due to powder fouling.
This Leech & Rigdon Confederate revolver has a lightly used appearance with a few marks on the cylinder and the wedge key. With a bright bore, it will be a joy to shoot! Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.
Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.
Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.
Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.
Combustible Paper Cartridge Ammunition,
for .36 caliber percussion revolvers,
period labeling, box of six
AMMO-36-CPC-6
Combustible Paper Cartridge Ammunition,
for .36 caliber percussion revolvers,
period labeling, box of six
BALL-375
.375" round balls, pure lead, Hornady, per 100
BALL-380-X
.380" round balls, pure lead, hand cast, per 100
BC-CTL
Choke Tube Lube,
anti-seize grease, 3/4 ounce tube,
by Birchwood Casey
BELT-BU-1O
Belt, oiled brown leather, 1-3/4" wide, waist size 30 to 46
BORE-CLEAN
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
CAPPER-P
Brass Capper, for No. 11 caps, straight line, made in the USA, by Tedd Cash
FLASK-COLT
Powder Flask,
Colt pattern for Army & Navy revolvers,
accepts all spouts with 10-1mm threads
HOLSTER-CS-L
Military Holster, left hand, brown leather, C.S. marked flap
HOLSTER-CS-R
Military Holster, right hand, brown leather, C.S. marked flap
MINK-OIL
Trapper's MINK OIL TALLOW,
patch grease,
for match shooting & cold weather hunting,
one 8 oz. tin
NW-140
Nipple Wrench for Revolvers,
for .36 & .44 Colt Army & Navy Models,
and other revolvers with a large nipple recess.
OX-CLEAN-35C
Cleaning Patches, 1-3/4" diameter, bag of 100, pure cotton flannel, for .27 to .35 caliber
OX-REV-36-SEAL
Ox-Yoke Revolver Wonder Seal, 100 seals for .36 cal.
OX-WAD-36-W
.36 caliber revolver Wonder Wad,
bag of 100 lubricated felt wads
TOOL-KEY-B
Drift Punch,
knurled brass,
for wedge keys and sights.
